Commercial Quantum Computer Identifies Molecular Candidate for Better Solar Cells

However, someone has to pay for this content. And that’s where advertising comes in. Most people consider ads a nuisance, but they do serve a useful function besides allowing media companies to stay afloat. They keep you aware of new products and services relevant to your industry. All ads in Quality Digest apply directly to products and services that most of our readers need. You won’t see automobile or health supplement ads.

Quality Digest does not charge readers for its content. We believe that industry news is important for you to do your job, and Quality Digest supports businesses of all types.

“It’s better to have many more measurements to be on the safe side when it comes to circumventing errors, but then we wouldn’t be able to run this algorithm in a timely manner,” Claudino says. “That’s when we came up with measurement optimization to bring down the size of our calculations to something that was reasonable in terms of computing time. We went from something that was prohibitively large to something that was amenable to the quantum hardware.”

ORNL team members applied three independent strategies to decrease the problem’s computational workload, which reduced their time to solution from months to a few weeks. First, in a technique called qubit tapering, they decreased the number of qubits required to express the problem, reducing the size of the problem itself. Second, they took fewer measurements to solve the problem by measuring groups of terms once rather than measuring each individual term from every group. Third, instead of implementing each circuit individually, they found a way to run four circuits in parallel, allowing them to use all 20 qubits in the H1-1.

(Oak Ridge National Laboratory: Oak Ridge, TN) — Using the full capabilities of the Quantinuum H1-1 quantum computer, researchers from the U.S. Department of Energy’s Oak Ridge National Laboratory not only demonstrated best practices for scientific computing on current quantum systems but also produced an intriguing scientific result.

“The energetics of singlet fission revolve around double electronic excitations—two electrons move up to higher energy levels simultaneously, which is quite difficult to pin down with algorithms for conventional computers,” Claudino says. “But the underlying way that a quantum computer works, it can naturally treat the quantum correlations that give rise to this singlet-fission phenomenon. That’s when we came to the realization that, yes, we should use a quantum computer to treat something that is inherently quantum. That’s well known. But I think we were the first to realize that it had the application for this specific problem.”

Quantum computing—a technology still in its formative stages compared to classical supercomputers such as the OLCF’s exascale-class Frontier—utilizes quantum bits, or qubits, to perform calculations. Unlike binary bits used in classical computers, qubits go beyond 1s and 0s to also use 1 and 0 simultaneously in a mixed superposition, exponentially increasing processing power for certain equations, such as those based in quantum mechanics. However, quantum computer systems are still prone to high error rates, and the team had to compensate for this challenge to achieve reliable results.

“Even though the approaches we used have been previously published, I would say they are far from being widely adopted,” Claudino says. “I think we make a strong case for the use of such approaches. Researchers should be mindful that they may be wasting quantum resources and potentially increasing errors in their simulations by not taking advantage of these techniques.”

Our PROMISE: Quality Digest only displays static ads that never overlay or cover up content. They never get in your way. They are there for you to read, or not.

The ORNL team’s project demonstrated the viability of current quantum computers to tackle scientific problems that could affect daily life. Although Claudino doesn’t foresee tackling singlet fission again soon, his team is considering other problems—such as “the interaction of matter and light”—that might be solved using the quantum computing techniques demonstrated in this project.

Thanks,
Quality Digest

Commercial Quantum Computer Identifies Molecular Candidate for Better Solar Cells

ORNL team members applied three independent strategies to decrease their project’s computational workload

The University of Tennessee-Battelle manages ORNL for the U.S. Department of Energy’s Office of Science, the single largest supporter of basic research in the physical sciences in the United States. The Office of Science is working to address some of the most pressing challenges of our time. For more information, visit https://energy.gov/science.

So please consider turning off your ad blocker for our site.

By modeling singlet fission—in which absorption of a single photon of light by a molecule produces two excited states—the team confirmed that the linear H4 molecule’s energetic levels match the fission process’ requirements. The linear H4 molecule is, simply, a molecule made of four hydrogen atoms arranged in a linear fashion. A molecule’s energetic levels are the energies of each quantum state involved in a phenomenon, such as singlet fission, and how they relate and compare with one another. The fact that the linear molecule’s energetic levels are conducive to singlet fission could prove to be useful knowledge in the effort to develop more efficient solar panels.

With its high accuracy for a manageable computational cost, the ORNL team’s approach to using a quantum computer provides an effective simulation method. It can identify molecules that demonstrate singlet fission properties while bypassing approximations commonly found in techniques used for classical computers. The results of the work were published in The Journal of Physical Chemistry Letters.

ORNL team members applied three independent strategies to decrease their project’s computational workload, which reduced their time to solution from months to a few weeks. First, in a technique called qubit tapering, they decreased the number of qubits required to express the problem, reducing the size of the problem itself. Second, they took fewer measurements to solve the problem by measuring groups of terms once rather than measuring each individual term from every group (a process called qubit-wise commutativity). Third, instead of implementing each circuit individually, they found a way to run four circuits in parallel, allowing them to use all 20 qubits in the H1-1. Illustration credit: Adam Malin/ORNL.

“This is one of the leading motivating factors behind singlet fission. Conventional solar cells have a theoretical maximum efficiency of about 33%, but it has been postulated that materials that exhibit singlet fission can break that limit and can be more efficient,” says Daniel Claudino, a research scientist in ORNL’s Quantum Computational Science group and the project’s principal investigator. “The downside is that to understand fundamentally whether a certain material exhibits singlet fission is very hard. There is a specific energetic requirement, and it’s difficult to find materials that fulfill it.”

Singlet fission is a multistate phenomenon, so the ORNL team needed a computational method that could describe all the process’ quantum states on an equal footing to calculate accurate energetics numbers. They turned to PDS, which is a quantum solver based on the Peeters-Devreese-Soldatov approach and developed at Pacific Northwest National Laboratory.

PDS holds some advantages over classical strategies for determining a material’s energetic properties, including much higher accuracy than density functional theory and fewer computational demands than coupled cluster theory. And, because it was developed to improve the accuracy and efficiency of simulations in quantum chemistry, PDS is well suited to leverage the potential advantages of quantum computers.

The project was funded by the U.S. Department of Energy’s Office of Basic Energy Sciences. Access to the H1-1, an enterprise-ready quantum computer built by Quantinuum (formerly Honeywell), was provided by the Quantum Computing User Program at the Oak Ridge Leadership Computing Facility, a U.S. Department of Energy Office of Science user facility.

“We realized that if we wanted to just throw this entire thing into a quantum computer, it’s not going to work because it’s still too much for the current technology,” Claudino says. “The idea is that you want to envision a way to tap into the quantum computer but only for specific tasks that we know they can perform better than conventional computers. Yet, even then, you’re still limited by the current state of the art that only allows us to either go up to a certain size or perform tasks that only take so long. That’s the major bottleneck when turning to quantum computers.”